|Characterization of Ni3Al Alloy Fabricated by Thermal Explosion/Hot Extrusion Technique|
|Sheng, Liyuan; Du, Beining; Zan, Shaoping; Jiao, Junke
|Source Publication||MATERIALS SCIENCE-MEDZIAGOTYRA
|Abstract||In the present paper, the trace B doped Ni3Al alloy was prepared by the thermal explosion and hot extrusion (TH/HE) technique. Its microstructure characterization and mechanical properties were carried out by OM, XRD, TEM, compression and microhardness tests. Microstructure examinations exhibit that the TH/HE technology has transformed the powders into Ni3Al alloy with less porosity. In the synthesized part, coarse and ultrafine Ni3Al grains constitute the dual-scale grain structure with segregated Al2O3 particles along grain boundary. TEM observations reveal that gamma-Ni, Al2O3 and Ni3Al phases coexist in the synthesized part. Moreover, the Al2O3 particles in the synthesized part have alpha-Al2O3 and gamma-Al2O3 two crystal structures. In addition, there is a transition region along the interface of Al2O3 and Ni3Al grain. The subsequent hot extrusion optimizes the microstructure of the extruded part by homogenizing the Ni3Al grain, uniformly distributing Al2O3 and generating massive substructures. The great deformation results in the pile-up of dislocations, intersected dislocations and substructures. Moreover, the movement of dislocation promotes the formation of micro-twinning in the Ni3Al grain, which is accompanied with the stacking faults and nano-structure. The mechanical properties exhibit that the microstructure optimization caused by the TE/HE technique improves the compressive ductility and strength of the Ni3Al alloy obviously.|
Sheng, Liyuan,Du, Beining,Zan, Shaoping,et al. Characterization of Ni3Al Alloy Fabricated by Thermal Explosion/Hot Extrusion Technique[J]. MATERIALS SCIENCE-MEDZIAGOTYRA,2018,24(4):393-398.
Sheng, Liyuan,Du, Beining,Zan, Shaoping,&Jiao, Junke.(2018).Characterization of Ni3Al Alloy Fabricated by Thermal Explosion/Hot Extrusion Technique.MATERIALS SCIENCE-MEDZIAGOTYRA,24(4),393-398.
Sheng, Liyuan,et al."Characterization of Ni3Al Alloy Fabricated by Thermal Explosion/Hot Extrusion Technique".MATERIALS SCIENCE-MEDZIAGOTYRA 24.4(2018):393-398.
|Files in This Item:||
||There are no files associated with this item.
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.