NIMTE OpenIR  > 2018专题
Study on immersion waterjet assisted laser micromachining process
Wang, Yufeng; Zhang, Zheng; Zhang, Guangyi; Wang, Bin; Zhang, Wenwu
2018
Source PublicationJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Volume262Pages:290-298
AbstractThe heat affected zone (HAZ), recast layer, and taper angle are the issues remained to be addressed in laser micromachining. In immersion waterjet assisted laser micromachining (IWALM) the waterjet flushes the ablated materials, plasma, and micro bubbles away from the machining area at laser pulse interval. A higher machining resolution could be obtained by reducing the laser beam through focusing system. This paper studied the mechanisms of IWALM and the effects of microbubbles explosion on the workpiece surface roughness around the entrance of machining area. With the developed experimental setup, the influences of the laser power, waterjet flow speed, and workpiece-nozzle gap were studied on the machining efficiency, taper angle, while machining microhole with diameter 0.5 mm by scanning the laser beam within waterjet diameter. In particular experimental conditions, the machining efficiency of IWALM was larger than that of laser micromachining in the air, while the workpiece thickness was smaller than 0.5 mm. Microholes with reduced HAZ and free of recast layer were fabricated by IWALM. The taper angle of the microholes processed by IWALM was 376% smaller than that by Laser micromachining in the air. Furthermore, the mechanisms of the formation of micro-pits during IWALM around the machining area were discussed, considering the explosions of micro bubbles near the workpiece surface due to the pressure difference. Experimental results indicated that a higher waterjet flow speed and smaller nozzle-workpiece gap, laser power could improve the surface quality in close to the machining area.
KeywordCavitation Bubble Ablation Mechanisms Pulses Simulation Underwater Silicon Plasma
Subject AreaChemistry ; Materials Science ; Physics
Language英语
Document Type期刊论文
Identifierhttp://ir.nimte.ac.cn/handle/174433/16987
Collection2018专题
Recommended Citation
GB/T 7714
Wang, Yufeng,Zhang, Zheng,Zhang, Guangyi,et al. Study on immersion waterjet assisted laser micromachining process[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2018,262:290-298.
APA Wang, Yufeng,Zhang, Zheng,Zhang, Guangyi,Wang, Bin,&Zhang, Wenwu.(2018).Study on immersion waterjet assisted laser micromachining process.JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,262,290-298.
MLA Wang, Yufeng,et al."Study on immersion waterjet assisted laser micromachining process".JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 262(2018):290-298.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Wang, Yufeng]'s Articles
[Zhang, Zheng]'s Articles
[Zhang, Guangyi]'s Articles
Baidu academic
Similar articles in Baidu academic
[Wang, Yufeng]'s Articles
[Zhang, Zheng]'s Articles
[Zhang, Guangyi]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Wang, Yufeng]'s Articles
[Zhang, Zheng]'s Articles
[Zhang, Guangyi]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.